Planet VC-232G 1-Port 10/100/1000T Ethernet over Coaxial Converter

Planet VC-232G High Performance Gigabit Ethernet over Coaxial Solution

To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications. PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage.

Superior Upstream and Downstream Transmission

The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes — asymmetric mode or symmetric mode — for the transmission of upstream and downstream signals.

■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps
The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance.

IP Ethernet over Long Distance Existing Coaxial Cables

The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications:

■ Long-distance IP network devices
■ IP digital signage
■ Cable TV to IPTV
■ Distance video education
■ Electronic billboards
■ Other applications

If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction.

Easy and Flexible Installation

The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.

Hardware Specifications
TP interface	1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL Interface	1 BNC female Ethernet over Coaxial Cabling Coaxial cable: 75 ohm RG-6/U cable, less than12Ω/1000 ft RG-59/U cable, less than 30Ω/1000 ft. Maximum Distance Max. 1400m with data transmission (4,593ft.)
Functionality	DIP-1: Select CO or CPE mode DIP-2: Select G.INP or Interleaved mode DIP-3: Select Band Profile (Asymmetric or Symmetric) DIP-4: Select SNR of 12dB or 8dB
Dimensions (W x D x H)	70 x 97 x 26 mm
Weight	185g
Power Requirement	DC 5V, 2A external power
LED Indicators	Power: Green 1000BASE-T LNK/ACT: Green VDSL: Green CO: Green CPE: Green
Housing	Metal
Switch Specifications
Switch Processing Scheme	Store-and-Forward
Address Table	2K entries
Flow Control	Back pressure for half duplex IEEE 802.3x pause frame for full duplex
System Specifications
VDSL Compliance	VDSL-DMT 　ITU-T G.993.1 VDSL 　ITU-T G.993.1 VDSL 　ITU-T G.997.1 　ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) 　ITU-T G.993.5 G. Vectoring 　ITU-T G.998 　G.INP
Standards Conformance
Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-duplex flow control IEEE 802.1p Class of Service ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G.Vectoring and G.INP ITU-T G.998
Regulatory Compliance	FCC Part 15 Class A, CE
Environment
Temperature	Operating: 0~50 degrees C Storage: -10~70 degrees C
Humidity	Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing)
Performance
Coaxial Performance	Interleave(Upstream/Downstream: Mbps) 　Asymmetric (8dB): 　200m ->88Mbps/168Mbps 　400m ->75Mbps/160Mbps 　600m ->59Mbps/129Mbps 　800m ->32Mbps/110Mbps 　Asymmetric (12dB): 　200m ->78Mbps/145Mbps 　400m ->69Mbps/137Mbps 　600m ->48Mbps/118Mbps 　800m ->26Mbps/94Mbps 　Symmetric (8dB): 　200m ->129Mbps/131Mbps 　400m ->117Mbps/122Mbps 　600m ->101Mbps/92Mbps 　800m ->62Mbps/73Mbps 　Symmetric (12dB): 　200m ->117Mbps/123Mbps 　400m ->102Mbps/102Mbps 　600m ->88Mbps/82Mbps 　800m ->47Mbps/56Mbps G.INP(Upstream/Downstream: Mbps) 　Asymmetric (8dB): 　200m ->95Mbps/200Mbps 　400m ->82Mbps/175Mbps 　600m ->59Mbps/151Mbps 　800m ->37Mbps/122Mbps 　Asymmetric (12dB): 　200m ->89Mbps/181Mbps 　400m ->71Mbps/156Mbps 　600m ->46Mbps/136Mbps 　800m ->30Mbps/102Mbps 　Symmetric (8dB): 　200m ->147Mbps/147Mbps 　400m ->132Mbps/135Mbps 　600m ->108Mbps/104Mbps 　800m ->76Mbps/78Mbps 　Symmetric (12dB): 　200m ->138Mbps/143Mbps 　400m ->116Mbps/120Mbps 　600m ->91Mbps/89Mbps 　800m ->58Mbps/60Mbps Note: As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors.