Planet GT-802 10/100/1000BASE-T to 1000BASE-SX Media Converter (SC,MM)-220/550m

Planet GT-802 Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802GT-802SGT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

Distance Extension with High Performance and Steady Network Communications

PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m). Single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.

Enhanced Smart Management Features

GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP).

The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function.

The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission.

The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link. The converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

Moreover, Even the web UI is not available on GT-80x. The network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting.

PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.

Easy Installation

The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit, when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location.

As the Gigabit Media Converter fully complies with:

  • IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX,
  • IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX,

The Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

Hardware Specifications
Hardware Version 3
Ports 1 x 10/100/1000BASE-T port,
GT-802:
1 x 1000BASE-SX SC port 

GT-802S:
1 x 1000BASE-LX SC port 

GT-805A:
1 x 100/1000BASE-X SFP port 

GT-806A15/GT-806B15/GT-806A60/GT-806B60:
1 x 1000BASE-BX SC port
Copper Interface RJ-45 port (Auto-MDI/MDI-X) Twisted Pair
Optic Interface GT-802/GT-802S: SC
GT-805A: SFP
GT-806A15/GT-806B15/GT-806A60/GT-806B60: WDM SC
Fiber Maximum Distance GT-802: 220/550m
GT-802S: 10km
GT-805A: N/A
GT-806A15: 15km
GT-806B15: 15km
GT-806A60: 60km
GT-806B60: 60km
Optic Wavelength GT-802: 850nm
GT-802S: 1310nm
GT-805A: N/A
GT-806A15:
  TX:1310nm
  RX:1550nm
GT-806B15:
  TX:1550nm
  RX:1310nm
GT-806A60:
  TX:1310nm
  RX:1550nm
GT-806B60:
  TX:1550nm
  RX:1310nm
Max. Optical Launch Power GT-802: -4dBm
GT-802S: -3dBm
GT-805A: N/A
GT-806A15: -3dBm
GT-806B15: -3dBm
GT-806A60: +5dBm
GT-806B60: +4dBm
Min. Optical Launch Power GT-802: -9.5dBm
GT-802S: -9.5dBm
GT-805A: N/A
GT-806A15: -9dBm
GT-806B15: -9dBm
GT-806A60: 0dBm
GT-806B60: -1dBm
Max. Input Power GT-802: N/A
GT-802S: -3
GT-805A: N/A
GT-806A15: -3
GT-806B15: -3
GT-806A60: -2
GT-806B60: -2
Min. Input Power GT-802: -18
GT-802S: -20
GT-805A: N/A
GT-806A15: -21
GT-806B15: -21
GT-806A60: -25
GT-806B60: -25
Optical Link Budget GT-802: 
  3dB(62.5/125μm)
  4dB(50/125μm)
GT-802S: 4.9dB
GT-805A: N/A
GT-806A15: 12dB
GT-806B15: 12dB
GT-806A60: 25dB
GT-806B60: 24dB
LED Indicator ■ PWR
■ TP LINK/ACT, 1000
■ Fiber LINK/ACT
DIP Switch LFP function (Disable/Enable) setting
Power Consumption 4.6 watts / 15 BTU (maximum)
Power Input DC 5V/2A
Dimensions (W x D x H) 26 x 70 x 97 mm
Weight 0.2kg
Converter Specifications
Speed Twisted-pair:
  10/20Mbps for half/full-duplex
  100/200Mbps for half/full duplex 
  2000Mbps for full-duplex
Fiber-optic: 
  2000Mbps for full-duplex
  200Mbps for full-duplex (GT-805A only)
Network Cables Twisted-pair
  10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
  100BASE-TX: 2-pair UTP Cat. 5, up to 100m
  1000BASE-T: 4-pair STP Cat 5 up to 100m

Fiber-optic Cable
1000BASE-SX:
  50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m. 
1000BASE-LX:
  9/125μm single-mode cable, providing long distance for 10/15/20/30/40/50/60/70/120km (vary on SFP module)

100BASE-FX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km(vary on SFP module)
9/125μm single-mode cable, providing long distance for 20/40/60m (vary on SFP module)
OAM TS-1000 and IEEE 802.3ah Terminal mode supported
Jumbo Packet Size 9K
Standard Conformance
Standards Compliance IEEE 802.3, 10BASE-T 
IEEE 802.3u, 100BASE-TX
IEEE 802.3ab, 1000BASE-T
IEEE 802.3z, 1000BASE-SX/LX
IEEE 802.3x Full-duplex flow control
Environment
Operating Environment Operating temperature: 0 to 50 degrees C; Humidity: 5~95% non-condensing
Storage Environment storage temperature: -10 to 70 degrees C; Humidity: 5~95% non-condensing
Emissions FCC Class A, CE Class A

Sản phẩm ngẫu nhiên